lincoln heights

…FSCM fire support coordination measure GAT guidance, apportionment, and targeting (now called TET) GCC Global Cryptologic Center GEOINT geospatial intelligence GPS global positioning system HAE height above ellipsoid HUMINT human intelligence IADS integrated air defense system

…Commanders strive to apply the many dimensions of military power simultaneously across the depth, breadth, and height of the operational area. Considerations for Shaping JFCs are able to assist in determining the shape and character of…

…Space-based systems, such as GPS and GPS- aided weapons, and imagery source material from sensors with space-based guidance provide coordinate elevations using the WGS-84 height above ellipsoid (HAE) datum. Most airborne navigation and…

…Balance and Simultaneity (1) Commanders strive to apply the many dimensions of military power simultaneously across the depth, breadth, and height of the operational area. This applies in all combat operations, but is the most extensive…

…A communications plateau can be deduced by calculating the average height of the structures in a zone. Operation of antennas above the median line of this plateau will result in better wave propagation and aid in…

…The shooter exposes himself/herself at the height the enemy would expect a target to appear and risks exposing the entire length of his/her body as a target for the enemy. Figure A-51. Firing…

…Building height and size may vary dramatically (Figure 1-8). Generally, there is more open space between buildings located in the outlying high-rise areas than is found within the city core area. Figure 1-8…

…Type of Construction Building Material Height (Stories) Average Wall Thickness (cm) Mass Stone 1 to 10 75 Mass Brick 1 to 3 22 Mass Brick 3 to 6 38 Mass Concrete block 1 to 5 20…

…For low-angle artillery, the dead space is about five times the height of the building. For mortars and high-angle artillery, the dead space is about one-half the height of the building. (7) Aerial…

…Varying their height and location makes them hard to pinpoint and identify. Dummy loopholes, knocked-off shingles, or holes that are cut but not intended to be used as firing positions aid in deception. Loopholes located…

…Assuming that all outer walls are constructed of reinforced concrete, a rule of thumb for breaching is to place 10 pounds of C4 against the target between waist and chest height. When detonated, this normally blows…

…Typical city cores are made up of high-rise buildings which vary in height. Modern urban planning for built-up areas allows for more open spaces between buildings than in old city cores or in core…

…Tall buildings also create areas of indirect-fire dead space, which are areas that cannot be engaged by indirect fire because of a combination of building height and angle of fall of the projectile (Figure B…

…These areas generally consist of clusters of industrial buildings varying from one to five stories in height. Buildings generally vary dramatically in size and composition to match the needs of the particular businesses they house. Industrial…

…The building heights are fairly uniform—2 or 3 stories in small towns, 5 to 10 or more stories in large cities (Figure 1-5). Figure 1-5. Core Periphery ___________________________________________________________________________________________________________ MCWP 3-35.3 1-6

…For low-angle artillery fire, dead space is about five times the height of the building behind which the target sits. For mortar fire, dead space is only about one-half the height of the building…