whipple federal building

…The analyst conducts in-depth research and builds a base of knowledge on the target entity.  Step 2. Next, the analyst seeks to identify the logical antecedents of the situation. This is called building a…

…helicopters increase military presence and can provide immediate, accurate gunfire. (13) Before search and clear of a building, use loudspeakers to explain your intentions to noncombatants and enlist their cooperation. (14) Use a minimum amount of…

…in the main supply routes. (3) Providing security of critical sites and facilities, including communications centers, government buildings, water and electrical supply facilities, command and control nodes, airfields, storage facilities, and other essential areas. (4) Provide…

…Every aspect, from taking a building to using destructive technology and coordinating combined arms, must be thoroughly understood. Careful consideration of these five factors can minimize the cost of urban warfare to the attacker. Attacker cost…

…The 40-mm grenades can be used to suppress the enemy in a building or inflict casualties by firing through apertures or windows. The MK19 can use its high rate of fire to concentrate rounds against…

…These can be used to mark the FLOT, casualties, cleared buildings and rooms, weapons positions, and individual Marines. Their use must be clearly addressed in the unit’s SOP. When markers are used for extended periods…

…The proximity of buildings to targets, minimum range restrictions, and repositioning requirements are all factors in the utilization of fire support in the defense. Additionally indirect fires are planned on top of and immediately around defensive…

…This includes breaching minefields and neutralizing booby traps and IEDs. (d) Assault breaching into buildings. Military Operations on Urbanized Terrain 4-13

…For instance, a fixed building may be watched, but does not become a target until some critical person, group, or equipment arrives, at which time the on-call mission is scheduled on the tasking order if…

…It describes tactics, techniques and procedures to be employed for seizing and clearing buildings and other urbanized areas. Chapter 6 addresses some considerations associated with fighting under constraints and restraints on urbanized terrain. Section I Planning…

…In the urban environment, this equates to the physical occupation of key public buildings, avenues of approach, transportation centers, industrial parks, etc. This defense focuses combat power to repel the attacker’s advance and/or penetration…

…Pieing is an effective technique for clearing dead space inside rooms and buildings to gain security of hallways, stairwells, mouseholes, and so on. It is conducted by using the ready carry position or short stocking technique…

…The Marine will get into a prone position near the corner of a building or obstacle around which he/ she needs to observe. The weapon is short stocked, and the muzzle is pointed in the direction…

Section V Clearing Techniques This section will discuss basic clearing techniques; however, the fundamentals may have to be modified depending on the various situations and building/room layouts that Marines may encounter. Caution should be taken…

…Basic structured analytic techniques are the building blocks upon which further analysis is done. They serve as the baseline for using the core Army analytic techniques described in chapter 5. 3-4. The more important the…

…Wind tunneling can have a negative impact on aviation support within the urbanized area by creating dangerous wind effects down streets and between buildings. (f) Day/Night Differences. Night and periods of reduced visibility favor surprise…

…It can also easily penetrate wooden-framed buildings. The .50-caliber round can penetrate all of the commonly found urban barriers except a sand-filled 55-gallon drum. (4) Wall Penetration. Continued and concentrated machine gun…

…Certain levels of collateral damage estimation require expertise that lies outside of the CFACC's—or even CFC's—control and must be coordinated through the ISRD via federated and reachback relationships. In another sense, the…

…of bridges Layout of underground networks such as subways, sewers, and utility ducts Types and construction of buildings Location of key communications and transportation facilities Location of canals and waterways. Information on port facilities should include…

…These effects often create massive rubbling of structures and buildings, making obstacles to both friendly and enemy movement. (7) Mortars may be initially positioned forward in support of security forces. After their withdrawal, mortars are repositioned…