hh 60 pave hawk

…Breaching holes for unit mobility should be about 24 inches (60 centimeters) in diameter. Loopholes should be about 8 inches (20 centimeters) in diameter (Figure B-6). Only the SMAW provides a one-shot wall breaching…

A-1 APPENDIX A LEGAL CONSIDERATIONS IN TARGETING 1. Introduction It is DOD policy that members of DOD comply with law of war during all armed conflicts, however such conflicts are characterized, and in all other…

Executive Summary xiii Generally, TSTs are engaged using dynamic targeting, so the command and control arrangements should include the rapid identification and communication capabilities required for expedited decision making. among components. Once this guidance is issued…

Air Force Doctrine Publication 3-60, Targeting 6 On-call Targets. These are planned targets upon which fires are determined using the deliberate targeting process and executed using the dynamic targeting process. This means these targets…

…If possible, they should also wear earplugs and avoid the tank’s frontal 60-degree arc during firing (Figure B-15). WARNING The overpressure from the tank 120-mm cannon can kill a marine found within…

…The 60-mm mortar is normally used at the discretion of the rifle company commander. (2) Movement and Positioning. 81-mm mortars employed in GS normally occupy a position within or near the infantry battalion reserve…

Air Force Doctrine Publication 3-60, Targeting 18 CHAPTER 3: THE TARGETING PROCESS The targeting process is both a joint- and component-level process. The overall joint process is complicated by the need to deconflict target…

Executive Summary x JP 3-60 employing the ways and means to create desired effects that support achievement of objectives. Once actions are taken against targets, the commander and staff assess the effectiveness of the actions…

Chapter II II-10 JP 3-60 adversary to organize substitute consumption, alternate production, or procurement before the system is functionally degraded. c. Recuperation is a measurement of the time and cost required for a target…

Chapter V V-60 JP 3-0 c. Forces and Capabilities Mix. The JFC may need to realign forces and capabilities or adjust force structure to begin stability operations in some portions of the operational area…

Component Targeting Processes C-9 CONOPS or, if the new target or mission is of sufficient priority, request or direct diversion of committed assets. During this process, the commanders normally depend upon the operation center director…

vii EXECUTIVE SUMMARY COMMANDER’S OVERVIEW • Provides an understanding of Targets and Targeting • Explains the Joint Targeting Cycle • Addresses Joint Force Targeting Duties and Responsibilities Understanding Targets and Targeting Targeting is the process of selecting and…

…LOCAL SECURITY 2-60. Local security is the low-level security activities conducted near a unit to prevent surprise by the enemy. Local security is closely associated with unit force protection efforts. Local security provides immediate…

Appendix A A-2 JP 3-60 and its territories, or territorial seas, unless otherwise directed by SecDef. See CJCSI 3121.01, Standing Rules of Engagement/Standing Rules for the Use of Force for US Forces…

Executive Summary xi to be available for engagement within the target cycle. However, changes to the target status (priority, access, permissions) could result in the need (or opportunity) to engage the target during the current cycle…

…Because of their light weight, even heavy mortars can be hand-carried to firing positions that may not be accessible to vehicles. (1) The 60-mm and 81-mm mortars have limited effects on structural targets…

…Type Penetration Rounds Required 8-inch reinforced concrete Initial Loophole 35 250 14-inch triple brick Initial Loophole 90 160 12-inch cinder block with single-brick veneer Loophole Breach hole 60 250 9-inch double…

Executive Summary xii JP 3-60 solution under given circumstances. Capabilities analysis is comprised of four steps: target vulnerability analysis, capabilities assignment, feasibility assessment, and effects estimate. Joint Targeting Cycle Phase 4— Commander’s Decision and…

Appendix D D-6 JP 3-60 purpose does it serve? Without these pre-attack assessments, wartime functional damage assessments may be inadequately stated. Ideally, BDA will be performed by, or with, the input of the…